Ir a contenido
Preguntas frecuentes Envío Catálogos Todos los productos

Repair Parts

MT-RSR supplies brake lathe repair parts and replacements that keep your equipment cutting true. Our selection covers gears, belts, arbors, and other working components built to restore lathe performance and extend machine life. Pair repair parts with Brake Clamping, Consumable Parts, and Kits & Sets for a complete brake service solution.

Piezas de reparación

Filtros

$71.09 - $71.09
$71.09
$71.09 - $71.09
$71.09

Insertos para torno de freno VN/Rels 7687 (paquete de 10)

SKU: 29687A

MT-RSR

Insertos para VN/Rels (paquete de 10) Broca de rastrillo negativo con radio de 1/32 Se adapta a las siguientes marcas de tornos de freno: Re...

Ver todos los detalles
$71.09 - $71.09
$71.09
$71.09 - $71.09
$71.09
Spindle Quill Gear
Spindle Quill Gear
$342.35 - $342.35
$342.35
$342.35 - $342.35
$342.35

Engranaje de eje de accionamiento del husillo para tornos de freno

SKU: 70830

MT-RSR

Engranaje de reemplazo del husillo. 10 5/8" de largo con un diámetro de 2,83" Se adapta a los siguientes modelos de torno de freno: Ammco 3000...

Ver todos los detalles
$342.35 - $342.35
$342.35
$342.35 - $342.35
$342.35
Right hand thread VN, Accu Turn, FMC Arbor Nut
$32.74 - $32.74
$32.74
$32.74 - $32.74
$32.74

Tuerca de mandril de 1" - Para tornos de freno Accu-Turn, VN y FMC (rosca derecha inversa)

SKU: 20474R

MT-RSR

Tuerca de mandril para VN, Accu-Turn, FMC con rosca a la derecha Perspectivas de MT-RSR: Los tornos de freno suelen incluir de serie un mandri...

Ver todos los detalles
$32.74 - $32.74
$32.74
$32.74 - $32.74
$32.74
Gear For Ammco Trap assembly
Gear For Ammco Trap assembly
$91.56 - $91.56
$91.56
$91.56 - $91.56
$91.56

Engranaje impulsor para conjunto de trampa Ammco 7757

SKU: 4774

MT-RSR

Engranaje para el conjunto de trampa Ammco. Número de pieza del conjunto: 7757

$91.56 - $91.56
$91.56
$91.56 - $91.56
$91.56
Brass Thrust Washer for Quill Drive Gear
$60.71 - $60.71
$60.71
$60.71 - $60.71
$60.71

Arandela de empuje de latón para engranaje impulsor de pluma

SKU: 7033

MT-RSR

Arandela de empuje de latón para engranaje impulsor de pluma Números de piezas intercambiables: Ammco # 903033, 40030

$60.71 - $60.71
$60.71
$60.71 - $60.71
$60.71
Accu Turn Way Cover Spacer
$30.08 - $30.08
$30.08
$30.08 - $30.08
$30.08

Espaciador de cubierta de guía para tornos de freno Accu-Turn

SKU: 8682

MT-RSR

Espaciador de cubierta de vía para Accu-Turn

$30.08 - $30.08
$30.08
$30.08 - $30.08
$30.08
$18.27 - $18.27
$18.27
$18.27 - $18.27
$18.27

Llave de accionamiento del husillo (Ammco 909831)

SKU: 7831

MT-RSR

Llave de accionamiento del husillo (Ammco 909831) Números de piezas intercambiables: 909831, RM-40027

$18.27 - $18.27
$18.27
$18.27 - $18.27
$18.27
Ammco Thrust Bearing 929221
$106.27 - $106.27
$106.27
$106.27 - $106.27
$106.27

Cojinete de empuje para conjunto de alimentación transversal para tornos de freno Ammco

SKU: 7221

MT-RSR

Cojinete de empuje Números de piezas intercambiables: Ammco: 929221

$106.27 - $106.27
$106.27
$106.27 - $106.27
$106.27
Input Shaft Worm Gear For Brake Lathe
$526.37 - $526.37
$526.37
$526.37 - $526.37
$526.37

Engranaje helicoidal del eje de entrada para torno de freno

SKU: 9847

MT-RSR

Engranaje helicoidal del eje de entrada para torno de freno Números de piezas intercambiables: Ammco n.° 9847-C, 909847C RM-40040

$526.37 - $526.37
$526.37
$526.37 - $526.37
$526.37
Spanner Wrench Set for 5000 series
$52.09 - $52.09
$52.09
$52.09 - $52.09
$52.09

Juego de llaves inglesas para la serie 5000

SKU: 5005

MT-RSR

Llave inglesa para juego de 5000 Números de piezas intercambiables: 15, HK15, TMRHK15

$52.09 - $52.09
$52.09
$52.09 - $52.09
$52.09
Accu Turn Way Cover Wiper Set of 3
$40.39 - $40.39
$40.39
$40.39 - $40.39
$40.39

Juego de 3 limpiaparabrisas Accu-Turn Way Cover

SKU: 8736

MT-RSR

Limpiador de cubierta de guía para Accu-Turn, juego de 3

$40.39 - $40.39
$40.39
$40.39 - $40.39
$40.39
Ammco Spherical Washer
$17.39 - $17.39
$17.39
$17.39 - $17.39
$17.39

Arandela esférica para tornos de freno Ammco

SKU: 7165

MT-RSR

Arandela esférica para Ammco Números de piezas intercambiables: BP3165, TMRBP3165

$17.39 - $17.39
$17.39
$17.39 - $17.39
$17.39
Spherical Washer
$25.54 - $25.54
$25.54
$25.54 - $25.54
$25.54

Juego de arandelas esféricas para tornos de freno Ammco

SKU: 7138

MT-RSR

Arandela esférica

$25.54 - $25.54
$25.54
$25.54 - $25.54
$25.54
Hunter, Performance and All Tool 1" Arbor
$469.49 - $469.49
$469.49
$469.49 - $469.49
$469.49

Mandril de 1" Hunter, Performance y All Tool

SKU: 8500

MT-RSR

Mandril de 1" para herramientas Hunter, Performance o All Números de piezas intercambiables: Todas las herramientas: 5542 Rendimiento: 8542 ...

Ver todos los detalles
$469.49 - $469.49
$469.49
$469.49 - $469.49
$469.49
Micrometer Repair Screw
$40.65 - $40.65
$40.65
$40.65 - $40.65
$40.65

Tornillo micrométrico para ensamblaje de rotor-centrador, para tornos de freno FMC

SKU: 1016776

MT-RSR

Tornillo de reparación de micrómetro Números de piezas intercambiables: SM1016776, TMRSM1016776

$40.65 - $40.65
$40.65
$40.65 - $40.65
$40.65
$7.90 - $7.90
$7.90
$7.90 - $7.90
$7.90

Arandela de empuje para torno de freno 906874 Alimentación transversal

SKU: 7874

MT-RSR

Arandela de empuje para torno de freno Alimentación cruzada   Hecho en EE.UU. Números de piezas intercambiables: 6874, 906874 , RM-40019, ...

Ver todos los detalles
$7.90 - $7.90
$7.90
$7.90 - $7.90
$7.90
Accu Turn Alignment Washer Set of 2
$72.25 - $72.25
$72.25
$72.25 - $72.25
$72.25

Juego de 2 arandelas de alineación Accu-Turn

SKU: 83715

MT-RSR

Juego de arandelas de alineación para Accu-Turn Números de piezas intercambiables: 433715, WA433715, TMRWA433715

$72.25 - $72.25
$72.25
$72.25 - $72.25
$72.25
7218 Ammco Small Wrench 5/16" X 3/8"
$45.08 - $45.08
$45.08
$45.08 - $45.08
$45.08

Llave de 5/16 x 3/8" para Ammco 903218

SKU: 7218

MT-RSR

Llave de 5/16" x 3/8" para Ammco Número de pieza intercambiable: 903218, WR3218

$45.08 - $45.08
$45.08
$45.08 - $45.08
$45.08
Ammco Shaft
$48.02 - $48.02
$48.02
$48.02 - $48.02
$48.02

Eje para tornos de freno Ammco - Fabricado en EE. UU.

SKU: 77755

MT-RSR

Eje para Ammco 77755 Números de piezas intercambiables: 7767, SH7767, TMRSH7767

$48.02 - $48.02
$48.02
$48.02 - $48.02
$48.02
Clip Rotor for 7075
Clip Rotor for 7075
$9.95 - $9.95
$9.95
$9.95 - $9.95
$9.95

Clip/resorte de rotor para silenciador de rotor Ammco 7075

SKU: 7080EA

MT-RSR

Rotor de clip para 7075 Números de piezas intercambiables: 10276, SP10276, TMRSP10276

$9.95 - $9.95
$9.95
$9.95 - $9.95
$9.95
Washer for 204241
$23.46 - $23.46
$23.46
$23.46 - $23.46
$23.46

Arandela para 204241 - Fabricada en EE. UU.

SKU: 204240

MT-RSR

Arandela para 204241 Números de piezas intercambiables: WA204240, TMRWA204240

$23.46 - $23.46
$23.46
$23.46 - $23.46
$23.46
Shaft for Ammco Adjusting Rod
$40.65 - $40.65
$40.65
$40.65 - $40.65
$40.65

Varilla/eje de ajuste para accionamiento de avance transversal de torno de freno Ammco

SKU: 7337

MT-RSR

Eje para varilla de ajuste Ammco Números de piezas intercambiables: Ammco pieza n.° 910337 Hecho en EE.UU.

$40.65 - $40.65
$40.65
$40.65 - $40.65
$40.65
Ammco Feed Control Lever
$130.22 - $130.22
$130.22
$130.22 - $130.22
$130.22

Palanca de control de avance para tornos de freno Ammco

SKU: 7324

MT-RSR

Brazo de soporte Palanca de control de alimentación Ammco Optimice la funcionalidad de su brazo de soporte Ammco con nuestra palanca de control ...

Ver todos los detalles
$130.22 - $130.22
$130.22
$130.22 - $130.22
$130.22
$662.20 - $662.20
$662.20
$662.20 - $662.20
$662.20

Brake Lathe 3‑Jaw Double Taper Chuck with Wrench

SKU: 80040

MT-RSR

80040 – Brake Lathe 3‑Jaw Double Taper Chuck with Wrench Get secure, precise rotor and drum mounting with the 80040 Brake Lathe 3‑Jaw Double Tape...

Ver todos los detalles
$662.20 - $662.20
$662.20
$662.20 - $662.20
$662.20

Arbor nuts hold the rotor stack tight against the arbor, and a worn one lets everything shift mid-cut. We stock nuts for Ammco lathes plus Van Norman, Accu-Turn, and FMC machines.

Shop Arbor Nuts
Buying and Installing Brake Lathe Repair Parts

Buying and Installing Brake Lathe Repair Parts

You should not have to gamble on a part fitting. Every listing shows interchangeable part numbers, so you can match an Ammco model 4000 replacement part to its OEM number in about thirty seconds. That direct access to real fitment data is what separates us from other sellers, where you are squinting at stock photos and hoping. When a part goes, pull it and look at what it touches. A failing feed screw usually chews the nut riding on it, and a slipping belt often points back to a scored pulley. Order both together, and you open the machine once instead of twice, which means one afternoon of downtime rather than two. Installation rewards a little patience. Clean the mating surfaces, confirm the center hole and mounting faces sit flat, and torque the fasteners evenly. Spin the machine empty and listen before you cut rotors again. The smartest shops keep spindle boots, belts, and springs on the shelf, because those wear out on their own schedule and never on yours. A rotor silencer band runs a few dollars and kills chatter on a larger rotor, where extra rotor mass and vibration fight your finish every pass.

Learn More

Frequently Asked Questions

Our brake lathe parts fit major brands including Ammco lathes, Accu-Turn, FMC, John Bean, Hunter, Van Norman, and Kwikway. Check the interchangeable part numbers on each listing to confirm fitment with your equipment.

Match the number stamped on the old component to the part numbers shown on our product pages. If that number has worn off, our downloadable parts manuals cover Ammco models 3000, 4000, 4100, 7500, and others.

Chatter usually comes from a worn arbor, a loose arbor nut, dull bits, or a larger rotor with enough rotor mass to vibrate. A rotor silencer band damps that vibration while you cut rotors.

The shear gear in an Ammco right angle drive is designed to break first and protect the feed components behind it. Keeping a spare on the shelf turns a lost day into a ten-minute repair.

Replace it once the cross feed handle develops play or your cut depth drifts. Ammco lathe owners can choose old-style or new-style nuts, and drum feed screw nuts are available for FMC machines.

Yes. Spindle boots keep grit off the spindle, and drive belts pair with our aluminum pulley set. Both sit under Consumable Parts alongside tool holders, bits, and silencers.

Rotors mount through the center hole using cones and an adapter set, backed by an arbor nut. Hub-centric clamping keeps a light truck rotor running true during heavy-duty work.

Machines with the 6950 twin cutter setup use left- and right-hand negative rake tool holders, and we stock both. Matched holders keep each rotor face cutting evenly and protect lathe performance.

Beyond brake lathes, our shop carries tire changers, wheel balancers, and alignment parts, including cones and backing plates, plus tools and daily shop supplies for the service bay.

Stay in the Loop!

Subscribe to our newsletter for the latest product updates and exclusive offers from MT-RSR.

Comparar productos

{"one"=>"Seleccione 2 o 3 artículos para comparar", "other"=>"{{ count }} de 3 artículos seleccionados"}

Seleccione el primer artículo para comparar

Seleccione el segundo artículo para comparar

Seleccione el tercer elemento para comparar

Comparar