Ir a contenido
Preguntas frecuentes Envío Catálogos Todos los productos

Brake Lathe Consumable Parts & Supplies

MT-RSR carries a full selection of brake lathe consumable parts built for professional shops. Consumables are what hold your accuracy, finish quality, and repeatable resurfacing results in place cut after cut. From carbide inserts and tool holders to silencers and drive belts, our brake lathe parts keep an Amaco brake lathe running true. Pair consumables with brake clamping tools, repair parts, and kits and sets to keep your brake service fully equipped.

Piezas consumibles

Filtros

Ammco Short Negative Drum Tool Holder (Negative Rake)
$51.65 - $51.65
$51.65
$51.65 - $51.65
$51.65

Portaherramientas de tambor negativo corto Ammco (rastrillo negativo)

SKU: 7872S

MT-RSR

Portaherramientas de tambor negativo corto para Ammco (rastrillo negativo) Perspectivas de MT-RSR: Usar con inserto 7681

$51.65 - $51.65
$51.65
$51.65 - $51.65
$51.65
24176 VN RH Drum Bits (Packs of 10)
$182.05 - $182.05
$182.05
$182.05 - $182.05
$182.05

24176 VN RH Brocas para tambor (paquetes de 10)

SKU: 24176

MT-RSR

Brocas de tambor RH para VN (paquetes de 10) Se adapta a las siguientes marcas de tornos de freno: FMC/John Bean - Torno de tambor 800 Rel...

Ver todos los detalles
$182.05 - $182.05
$182.05
$182.05 - $182.05
$182.05
Poly V Belt
$75.35 - $75.35
$75.35
$75.35 - $75.35
$75.35

Correa trapezoidal multinervadura reforzada con fibra de polietileno (para tornos de freno)

SKU: J-240B

MT-RSR

Correa Poly V

$75.35 - $75.35
$75.35
$75.35 - $75.35
$75.35
Micro Rib Poly V Belt
$46.65 - $46.65
$46.65
$46.65 - $46.65
$46.65

Correa trapezoidal de 10 nervaduras, 30" de largo, para tornos de freno

SKU: 126381

MT-RSR

Correa trapezoidal de poliéster con micronervadura Longitud del paso (pulgadas): 30" Bandas/Costillas: 10

$46.65 - $46.65
$46.65
$46.65 - $46.65
$46.65
Torque Wrench for Mini Screw
Torque Wrench for Mini Screw
$17.03 - $17.03
$17.03
$17.03 - $17.03
$17.03

Destornillador/minillave con mango de bandera T7 para algunas brocas de torno de freno

SKU: 14-T7

MT-RSR

Llave Torx para minitornillos Perspectivas de MT-RSR: •Entre otros usos, esta herramienta es perfecta para nuestros portaherramientas 80337 , ...

Ver todos los detalles
$17.03 - $17.03
$17.03
$17.03 - $17.03
$17.03
$86.52 - $86.52
$86.52
$86.52 - $86.52
$86.52

Brocas de inclinación positiva Kwikway y Snap On (paquete de 10, tornillos especiales)

SKU: 7109S

MT-RSR

Brocas de rastrillo positivas Kwikway/ Snap On (paquete de 10) Se adapta a las siguientes marcas de tornos de freno: Broca de rastrillo Pos pa...

Ver todos los detalles
$86.52 - $86.52
$86.52
$86.52 - $86.52
$86.52
Accu Turn and FMC Zero Angle Drum Tool Holder (Short Version)
$54.26 - $54.26
$54.26
$54.26 - $54.26
$54.26

Portaherramientas de tambor de ángulo cero Accu-Turn y FMC (versión corta)

SKU: 8286S

MT-RSR

Portaherramientas de tambor de ángulo cero para Accu-Turn y FMC (versión corta) Perspectivas de MT-RSR: Usar con inserto 7796 O 7796P

$54.26 - $54.26
$54.26
$54.26 - $54.26
$54.26
Kwikway LH Positive Tool Holder
$34.00 - $34.00
$34.00
$34.00 - $34.00
$34.00

Portaherramientas positivo Kwikway LH

SKU: 7091

MT-RSR

Portaherramientas positivo LH Kwikway

$34.00 - $34.00
$34.00
$34.00 - $34.00
$34.00
Universal Ventilated Rotor Silencer Non Adjustable
$71.42 - $71.42
$71.42
$71.42 - $71.42
$71.42

Silenciador de rotor ventilado universal - No ajustable

SKU: 6031

MT-RSR

Silenciador de rotor ventilado universal - No ajustable Números de piezas intercambiables: Accuturn n.° 434470, TMRBS35, BS35

$71.42 - $71.42
$71.42
$71.42 - $71.42
$71.42
$117.97 - $117.97
$117.97
$117.97 - $117.97
$117.97

Pro-Cut Style Brake Lathe Bits - Pack of 6 with Screws

SKU: 50778A

MT-RSR

50778A - Pro-Cut Style Brake Lathe Bits - Pack of 6 with Screws Keep your brake lathe performing at its best with the 50778A Pro-Cut Style Brake ...

Ver todos los detalles
$117.97 - $117.97
$117.97
$117.97 - $117.97
$117.97
$60.05 - $60.05
$60.05
$60.05 - $60.05
$60.05

Portaherramientas redondo para torno de freno Hunter (mano izquierda)

SKU: 80337L

MT-RSR

Portaherramientas redondo para Hunter - Lado izquierdo Perspectivas de MT-RSR: Se utiliza con: Inserto redondo 2216263. Estos portaherramienta...

Ver todos los detalles
$60.05 - $60.05
$60.05
$60.05 - $60.05
$60.05
$83.40 - $83.40
$83.40
$83.40 - $83.40
$83.40

Portaherramientas para Accu-Turn y FMC (mano derecha)

SKU: 9043R

MT-RSR

Portaherramientas para Accu-Turn y FMC (lado derecho) Perspectivas de MT-RSR: Estos portaherramientas para brocas redondas permiten un acabado...

Ver todos los detalles
$83.40 - $83.40
$83.40
$83.40 - $83.40
$83.40
$83.40 - $83.40
$83.40
$83.40 - $83.40
$83.40

Portaherramientas para Accu-Turn y FMC (mano izquierda)

SKU: 9043L

MT-RSR

Portaherramientas para Accu-Turn y FMC (lado izquierdo) Perspectivas de MT-RSR: Estos portaherramientas para brocas redondas permiten un acabad...

Ver todos los detalles
$83.40 - $83.40
$83.40
$83.40 - $83.40
$83.40
$65.45 - $65.45
$65.45
$65.45 - $65.45
$65.45

Portaherramientas de punta redonda para Ammco (mano derecha)

SKU: BH69R

MT-RSR

Portaherramientas de punta redonda para Ammco (lado derecho) Perspectivas de MT-RSR: Estos portaherramientas para brocas redondas permiten un ...

Ver todos los detalles
$65.45 - $65.45
$65.45
$65.45 - $65.45
$65.45
$47.51 - $47.51
$47.51
$47.51 - $47.51
$47.51

Portaherramientas positivo corto izquierdo

SKU: 8764LS

MT-RSR

Portaherramientas positivo Números de piezas intercambiables: Versión larga: 8763L Número de fabricante original: Accu 433763, FMC 405 Par...

Ver todos los detalles
$47.51 - $47.51
$47.51
$47.51 - $47.51
$47.51
Right Short Positive Tool Holder
Right Short Positive Tool Holder
$47.51 - $47.51
$47.51
$47.51 - $47.51
$47.51

Portaherramientas positivo corto derecho

SKU: 8763RS

MT-RSR

Portaherramientas positivo Números de piezas intercambiables: Versión larga: 8763L Número de fabricante original: Accu 433763, FMC 405 Par...

Ver todos los detalles
$47.51 - $47.51
$47.51
$47.51 - $47.51
$47.51
24209 VN Positive Rake Left Hand Drum Bit (Packs of 10)
24209 VN Positive Rake Left Hand Drum Bit (Packs of 10)
$104.26 - $104.26
$104.26
$104.26 - $104.26
$104.26

24209 VN Broca de tambor de mano izquierda con rastrillo positivo (paquete de 10)

SKU: 24209

MT-RSR

Brocas de tambor LH para VN (paquetes de 10) Se adapta a las siguientes marcas de tornos de freno: Rels: 24209 Van Norman: 302167 Números ...

Ver todos los detalles
$104.26 - $104.26
$104.26
$104.26 - $104.26
$104.26
Short Positive Rake Tool Holder
$47.51 - $47.51
$47.51
$47.51 - $47.51
$47.51

Portaherramientas de inclinación positiva corta

SKU: 7970

MT-RSR

Portaherramientas de rastrillo positivo corto (para tambores) Perspectivas de MT-RSR: Usar con inserto 7914

$47.51 - $47.51
$47.51
$47.51 - $47.51
$47.51
$60.05 - $60.05
$60.05
$60.05 - $60.05
$60.05

Portaherramientas redondo para torno de freno Hunter (mano derecha)

SKU: 80337R

MT-RSR

Portaherramientas redondo para Hunter - Lado derecho Perspectivas de MT-RSR: Se utiliza con: Inserto redondo 2216263. Estos portaherramientas ...

Ver todos los detalles
$60.05 - $60.05
$60.05
$60.05 - $60.05
$60.05
$65.45 - $65.45
$65.45
$65.45 - $65.45
$65.45

Portaherramientas de punta redonda para Ammco (mano izquierda)

SKU: BH69L

MT-RSR

Portaherramientas de punta redonda para Ammco (lado izquierdo) Perspectivas de MT-RSR: Estos portaherramientas para brocas redondas permiten u...

Ver todos los detalles
$65.45 - $65.45
$65.45
$65.45 - $65.45
$65.45
$19.44 - $19.44
$19.44
$19.44 - $19.44
$19.44

Llave Torx para minitornillos - Tamaño de accionamiento T8

SKU: 14-T8

MT-RSR

Llave Torx para minitornillos - Tamaño de accionamiento T-8

$19.44 - $19.44
$19.44
$19.44 - $19.44
$19.44
Hold Down Clip for Round Inserts
$26.73 - $26.73
$26.73
$26.73 - $26.73
$26.73

Clip de sujeción para insertos redondos

SKU: BH69B

MT-RSR

Clip de sujeción para insertos redondos CB69 Perspectivas de MT-RSR: Se utiliza con portaherramientas BH69 y 9043 Hecho en EE.UU.

$26.73 - $26.73
$26.73
$26.73 - $26.73
$26.73

Inserts and bits do the actual cutting on a brake rotor or drum, so a fresh edge is what separates a smooth finish from chatter. We stock negative- and positive-rake styles for Ammco lathes, John Bean, Accu-Turn, and other major brands.

Shop Lathe Bits & Inserts
A Shop Guide to Ammco Brake Lathe Parts and Consumables

A Shop Guide to Ammco Brake Lathe Parts and Consumables

Ordering goes faster when you shop by part numbers instead of by memory. Every listing shows interchangeable part numbers, so a shop running an Ammco model 4000 can confirm fitment before checkout rather than hoping. A bit that almost fits will chatter its way through the cut, and cost you the rotor. Installation takes minutes. Inserts index into the holder and torque down, a belt slips over the pulley set once tension is released, and boots slide on after the cross feed is backed out. Keeping the machine in its original configuration protects the design Ammco engineered into the lathe, which is exactly what gives you repeatable results job after job. Service intervals follow your volume. Busy brake bays rotate inserts weekly, swap silencer bands once the rubber hardens, and check boots and belts each quarter. A larger rotor or a heavy-duty truck drum pulls harder on the cutting edge, so plan on shorter insert life and order accordingly. Replace parts before lathe performance slips. Scored finishes, chatter, and a spindle that sounds different under load all point to worn components. MT-RSR ships within one to three business days, so a shelf spare is never far away.

Learn More

Frequently Asked Questions

Consumables are the wear items you replace on a schedule: inserts, bits, silencer bands, boots, and belts. Every tool in this category has a service life tied to how much you cut.

Match the holder first. A round bit holder takes a round carbide insert, while negative rake holders on machines with a 6950 twin cutter take negative rake inserts. Check the listed part numbers to confirm.

Yes. Alongside Ammco lathes, we stock bits and inserts for John Bean, FMC Ranger, Accu-Turn, Kwikway, and Snap-on machines, so most major brands in your bay are covered.

Size it to the brake rotor you are turning. Small solid bands suit thin rotors, ventilated bands wrap any vented rotor, and a larger rotor or automotive drum takes the longer band.

It shields the spindle and feed screw from metal chips and shop grime. A torn boot lets debris reach the threads, which is where feed accuracy starts to go.

Check the belt whenever you service the machine. Glazing, cracking, or slipping under load means it is time, and belts are also sold as part of the aluminum pulley set.

Our repair parts are built to OE brake lathe specifications with USA-made manufacturing behind them, so you get the highest-quality fit without paying dealer pricing.

Most rotors mount through the center hole with cones and spacers. Rotors that need lug location use the hub holes and a matching adapter set from our brake clamping category.

Yes, and plenty of shops do. We supply wear parts for older-style machines as well as new lathe machines, so a well-maintained lathe keeps earning for years.

Stay in the Loop!

Subscribe to our newsletter for the latest product updates and exclusive offers from MT-RSR.

Comparar productos

{"one"=>"Seleccione 2 o 3 artículos para comparar", "other"=>"{{ count }} de 3 artículos seleccionados"}

Seleccione el primer artículo para comparar

Seleccione el segundo artículo para comparar

Seleccione el tercer elemento para comparar

Comparar