Ir a contenido
Preguntas frecuentes Envío Catálogos Todos los productos

Brake Lathe Consumable Parts & Supplies

MT-RSR carries a full selection of brake lathe consumable parts built for professional shops. Consumables are what hold your accuracy, finish quality, and repeatable resurfacing results in place cut after cut. From carbide inserts and tool holders to silencers and drive belts, our brake lathe parts keep an Amaco brake lathe running true. Pair consumables with brake clamping tools, repair parts, and kits and sets to keep your brake service fully equipped.

Piezas consumibles

Filtros

Clip On Disc Silencer
$82.59 - $82.59
$82.59
$82.59 - $82.59
$82.59

Silenciador de disco de rotor de freno con clip para tornos de freno

SKU: 6041A

MT-RSR

Silenciador de disco con clip Números de piezas intercambiables: TMRCS1, CS1

$82.59 - $82.59
$82.59
$82.59 - $82.59
$82.59
Ammco LH Tool Holder
$76.72 - $76.72
$76.72
$76.72 - $76.72
$76.72

Portaherramientas LH para torno de freno Ammco 6950 de doble corte

SKU: 7650

MT-RSR

Portaherramientas LH Ammco Se adapta a las siguientes marcas de tornos de freno: Compatible con todos los modelos equipados con cortador doble...

Ver todos los detalles
$76.72 - $76.72
$76.72
$76.72 - $76.72
$76.72
Hunter Micro Bits (Pack of 10)
Hunter Micro Bits (Pack of 10)
$102.72 - $102.72
$102.72
$102.72 - $102.72
$102.72

Micropuntas Hunter (paquete de 10)

SKU: 2216263

MT-RSR

Reemplaza las brocas Hunter 221-538-3 y tiene múltiples filos de corte cuando está indexado. Se adapta a las siguientes marcas de tornos de freno...

Ver todos los detalles
$102.72 - $102.72
$102.72
$102.72 - $102.72
$102.72
Accu Turn Cogged Belt
$21.18 - $21.18
$21.18
$21.18 - $21.18
$21.18

Correa trapezoidal dentada para tornos de freno Accu-Turn

SKU: 433673

MT-RSR

Correa dentada para Accu-Turn Números de piezas intercambiables: TMRVB433673 Correa trapezoidal dentada para tornos de ...

Ver todos los detalles
$21.18 - $21.18
$21.18
$21.18 - $21.18
$21.18
Positive Rake Bit (10/pack)
Positive Rake Bit (10/pack)
$70.06 - $70.06
$70.06
$70.06 - $70.06
$70.06

Insertos/brocas de rastrillo positivo para tornos de freno Ammco (paquete de 10)

SKU: 7681

MT-RSR

Broca de rastrillo positiva (paquete de 10) Se adapta a las siguientes marcas de tornos de freno: Ammco - 3850, 4000, 7000, 7500, 800OTV, 4041...

Ver todos los detalles
$70.06 - $70.06
$70.06
$70.06 - $70.06
$70.06
Hunter LH & RH Round Tool Holder
$130.04 - $130.04
$130.04
$130.04 - $130.04
$130.04

Portaherramientas redondo Hunter LH y RH

SKU: 80337

MT-RSR

Conjunto de portabrocas redondo Hunter (incluye uno derecho y uno izquierdo) Viene con broca. Se adapta a las siguientes marcas de tornos de f...

Ver todos los detalles
$130.04 - $130.04
$130.04
$130.04 - $130.04
$130.04
Ammco Positive Rake Coated Carbide Bit/ Insert (Pack of 10)
Ammco Positive Rake Coated Carbide Bit/ Insert (Pack of 10)
$92.51 - $92.51
$92.51
$92.51 - $92.51
$92.51

Broca/inserto de carburo con revestimiento de rastrillo positivo Ammco (paquete de 10)

SKU: 6918

MT-RSR

Broca/ inserto de carburo con revestimiento de rastrillo positivo para Ammco (paquete de 10) Perspectivas de MT-RSR: Recubierto para una larga...

Ver todos los detalles
$92.51 - $92.51
$92.51
$92.51 - $92.51
$92.51
Pro Cut Positive Rake Bits for 50695 (Pack of 10)
Pro Cut Positive Rake Bits for 50695 (Pack of 10)
$86.09 - $86.09
$86.09
$86.09 - $86.09
$86.09

Brocas de corte positivo Pro-Cut (paquete de 10)

SKU: 50742A

MT-RSR

Brocas de corte positivo Pro Cut (paquete de 10) Corte profesional: 50742 Pro Cut - Se adapta a todos los Procut Se adapta a: En torno de au...

Ver todos los detalles
$86.09 - $86.09
$86.09
$86.09 - $86.09
$86.09
Solid Magnetic Rotor Silencer Band (0.25" x 4' 6.35mm x 101.6mm)
$15.70 - $15.70
$15.70
$15.70 - $15.70
$15.70

Banda silenciadora de rotor magnético sólido (0,25" x 4' - 6,35 mm x 101,6 mm)

SKU: 6038

MT-RSR

Mejore el rendimiento de su torno de freno con nuestra banda silenciadora magnética sólida para rotor. Con medidas de 6,35 mm x 101,6 mm (0,25" x ...

Ver todos los detalles
$15.70 - $15.70
$15.70
$15.70 - $15.70
$15.70
Clip on Silencer for Pro Cut Lathes Heavy Duty
$81.12 - $81.12
$81.12
$81.12 - $81.12
$81.12

Silenciador con clip para tornos Pro Cut de alta resistencia

SKU: 6045HD

MT-RSR

Silenciador con clip para tornos Pro-cut de alta resistencia Número de pieza intercambiable: TMRCS5, CS5, CS-5, 50703, 90198P, CSPC-50DT, CSPC...

Ver todos los detalles
$81.12 - $81.12
$81.12
$81.12 - $81.12
$81.12
Authentic Pro-Cut 50-778 Performance Plus Cutting Inserts/Tips - 6 pk
$154.28 - $154.28
$154.28
$154.28 - $154.28
$154.28

Insertos de corte Pro-Cut Performance Plus (paquete de 6)

SKU: PRO-50778

Pro-Cut

Insertos/puntas de corte Pro-Cut 50-778 Performance Plus auténticos (paquete de 6) Las puntas de corte más nuevas y de mayor rendimiento de Pro-...

Ver todos los detalles
$154.28 - $154.28
$154.28
$154.28 - $154.28
$154.28
Right Long Positive Tool Holder
Right Long Positive Tool Holder
$47.51 - $47.51
$47.51
$47.51 - $47.51
$47.51

Portaherramientas positivo largo derecho

SKU: 8763R

MT-RSR

Portaherramientas positivo Números de piezas intercambiables: Versión larga: 8764R Número de fabricante original: Accu 433764, FMC 404 Par...

Ver todos los detalles
$47.51 - $47.51
$47.51
$47.51 - $47.51
$47.51
Ammco Cogged V Belt
$22.45 - $22.45
$22.45
$22.45 - $22.45
$22.45

Correa trapezoidal dentada para tornos de freno Ammco

SKU: 7161COG

MT-RSR

Correa trapezoidal dentada para Ammco Números de piezas intercambiables: Ammco: VB31610007, 3161COG, VB3161COG, TMRVB3161COG

$22.45 - $22.45
$22.45
$22.45 - $22.45
$22.45
Large Ventilated Disc Rotor Silencer Range: 10 12" Diameter
$69.30 - $69.30
$69.30
$69.30 - $69.30
$69.30

Silenciador de rotor de disco ventilado grande, rango de diámetro de 10 a 12 pulgadas

SKU: 6032

MT-RSR

Silenciador de rotor de disco ventilado grande, rango de diámetro de 10 a 12 pulgadas Números de piezas intercambiables: Accuturn n.° 433785, ...

Ver todos los detalles
$69.30 - $69.30
$69.30
$69.30 - $69.30
$69.30
Left Long Positive Tool Holder
$47.51 - $47.51
$47.51
$47.51 - $47.51
$47.51

Portaherramientas positivo largo izquierdo

SKU: 8764L

MT-RSR

Portaherramientas positivo Para rotores y volantes Lado izquierdo del 8763R Hecho en EE.UU.

$47.51 - $47.51
$47.51
$47.51 - $47.51
$47.51
2 3/4" Truck Drum Silencer Band Extra Long (Length: 6') Ammco 5290
$94.89 - $94.89
$94.89
$94.89 - $94.89
$94.89

Banda silenciadora para tambor de camión de 2 3/4" extra larga (longitud: 6') Ammco 5290

SKU: 6037

MT-RSR

Experimente un funcionamiento más silencioso y suave de sus tambores de freno con nuestra banda silenciadora extra larga de 2 3/4" para tambores d...

Ver todos los detalles
$94.89 - $94.89
$94.89
$94.89 - $94.89
$94.89
Kwikway and Snap On Positive Rake Bits (10/pack)
Kwikway and Snap On Positive Rake Bits (10/pack)
$67.77 - $67.77
$67.77
$67.77 - $67.77
$67.77

Brocas de rastrillo positivo Kwikway y Snap On (paquete de 10)

SKU: 7109A

MT-RSR

Brocas de rastrillo positivas Kwikway/ Snap On (paquete de 10) Se adapta a las siguientes marcas de tornos de freno: Broca de rastrillo Pos pa...

Ver todos los detalles
$67.77 - $67.77
$67.77
$67.77 - $67.77
$67.77
Accu Turn and FMC Zero Angle Drum Tool Holder
$54.26 - $54.26
$54.26
$54.26 - $54.26
$54.26

Portaherramientas de tambor de ángulo cero Accu-Turn y FMC

SKU: 8286

MT-RSR

Portaherramientas de tambor de ángulo cero para Accu-Turn y FMC (8286) Perspectivas de MT-RSR: Usar con inserto 7796 O 7796P

$54.26 - $54.26
$54.26
$54.26 - $54.26
$54.26
FMC / John Bean 0.048" Radius Positive Rake Bits (10 Pack)
FMC / John Bean 0.048" Radius Positive Rake Bits (10 Pack)
$58.63 - $58.63
$58.63
$58.63 - $58.63
$58.63

Brocas de radio de inclinación positivo FMC/John Bean de 0,048" (paquete de 10)

SKU: 90327

MT-RSR

Brocas de inclinación positiva con radio de 0,048" (paquete de 10) Se adapta a las siguientes marcas de tornos de freno: Broca de rastrillo po...

Ver todos los detalles
$58.63 - $58.63
$58.63
$58.63 - $58.63
$58.63
$71.09 - $71.09
$71.09
$71.09 - $71.09
$71.09

Insertos para torno de freno VN/Rels 7687 (paquete de 10)

SKU: 29687A

MT-RSR

Insertos para VN/Rels (paquete de 10) Broca de rastrillo negativo con radio de 1/32 Se adapta a las siguientes marcas de tornos de freno: Re...

Ver todos los detalles
$71.09 - $71.09
$71.09
$71.09 - $71.09
$71.09
7687 VN/Rels Inserts (10/pack)
7687 VN/Rels Inserts (10/pack)
$71.09 - $71.09
$71.09
$71.09 - $71.09
$71.09

7687 Insertos VN/Rels (paquete de 10)

SKU: 7687

MT-RSR

Insertos para VN/Rels (paquete de 10) Broca de rastrillo negativo con radio de 1/32 Se adapta a las siguientes marcas de tornos de freno: Re...

Ver todos los detalles
$71.09 - $71.09
$71.09
$71.09 - $71.09
$71.09
V Belt for Ammco 4100
$18.83 - $18.83
$18.83
$18.83 - $18.83
$18.83

Correa trapezoidal para tornos de freno Ammco serie 4100

SKU: 7411

MT-RSR

Correa trapezoidal para Ammco 4100

$18.83 - $18.83
$18.83
$18.83 - $18.83
$18.83
Accu Turn and FMC R & L Hand Tool Holder
$152.38 - $152.38
$152.38
$152.38 - $152.38
$152.38

Portaherramientas manual Accu-Turn y FMC R & L

SKU: 9043

MT-RSR

Portaherramientas manual R&L para Accu-Turn y FMC Incluye: 9043L Portaherramientas redondo para mano izquierda 90...

Ver todos los detalles
$152.38 - $152.38
$152.38
$152.38 - $152.38
$152.38
Adjustable Latex Tubing Ventilated Rotor Silencer
$43.67 - $43.67
$43.67
$43.67 - $43.67
$43.67

Silenciador de rotor ventilado con tubo de látex ajustable

SKU: 6035

MT-RSR

Silenciador de rotor ventilado con tubo de látex ajustable Número de pieza intercambiable: BS30, TMRBS30

$43.67 - $43.67
$43.67
$43.67 - $43.67
$43.67

Inserts and bits do the actual cutting on a brake rotor or drum, so a fresh edge is what separates a smooth finish from chatter. We stock negative- and positive-rake styles for Ammco lathes, John Bean, Accu-Turn, and other major brands.

Shop Lathe Bits & Inserts
A Shop Guide to Ammco Brake Lathe Parts and Consumables

A Shop Guide to Ammco Brake Lathe Parts and Consumables

Ordering goes faster when you shop by part numbers instead of by memory. Every listing shows interchangeable part numbers, so a shop running an Ammco model 4000 can confirm fitment before checkout rather than hoping. A bit that almost fits will chatter its way through the cut, and cost you the rotor. Installation takes minutes. Inserts index into the holder and torque down, a belt slips over the pulley set once tension is released, and boots slide on after the cross feed is backed out. Keeping the machine in its original configuration protects the design Ammco engineered into the lathe, which is exactly what gives you repeatable results job after job. Service intervals follow your volume. Busy brake bays rotate inserts weekly, swap silencer bands once the rubber hardens, and check boots and belts each quarter. A larger rotor or a heavy-duty truck drum pulls harder on the cutting edge, so plan on shorter insert life and order accordingly. Replace parts before lathe performance slips. Scored finishes, chatter, and a spindle that sounds different under load all point to worn components. MT-RSR ships within one to three business days, so a shelf spare is never far away.

Learn More

Frequently Asked Questions

Consumables are the wear items you replace on a schedule: inserts, bits, silencer bands, boots, and belts. Every tool in this category has a service life tied to how much you cut.

Match the holder first. A round bit holder takes a round carbide insert, while negative rake holders on machines with a 6950 twin cutter take negative rake inserts. Check the listed part numbers to confirm.

Yes. Alongside Ammco lathes, we stock bits and inserts for John Bean, FMC Ranger, Accu-Turn, Kwikway, and Snap-on machines, so most major brands in your bay are covered.

Size it to the brake rotor you are turning. Small solid bands suit thin rotors, ventilated bands wrap any vented rotor, and a larger rotor or automotive drum takes the longer band.

It shields the spindle and feed screw from metal chips and shop grime. A torn boot lets debris reach the threads, which is where feed accuracy starts to go.

Check the belt whenever you service the machine. Glazing, cracking, or slipping under load means it is time, and belts are also sold as part of the aluminum pulley set.

Our repair parts are built to OE brake lathe specifications with USA-made manufacturing behind them, so you get the highest-quality fit without paying dealer pricing.

Most rotors mount through the center hole with cones and spacers. Rotors that need lug location use the hub holes and a matching adapter set from our brake clamping category.

Yes, and plenty of shops do. We supply wear parts for older-style machines as well as new lathe machines, so a well-maintained lathe keeps earning for years.

Stay in the Loop!

Subscribe to our newsletter for the latest product updates and exclusive offers from MT-RSR.

Comparar productos

{"one"=>"Seleccione 2 o 3 artículos para comparar", "other"=>"{{ count }} de 3 artículos seleccionados"}

Seleccione el primer artículo para comparar

Seleccione el segundo artículo para comparar

Seleccione el tercer elemento para comparar

Comparar