Skip to content
F.A.Q. Shipping Catalogs All Products

Lug-Centric Balancing

Lug-centric balancing locates each wheel by its lug holes instead of the center hole, giving you accurate balancing on trucks, SUVs, and aftermarket wheels that a standard cone can miss. MT-RSR builds SpeedPlate systems, shafts, collets, and flange plate kits for 40mm shaft wheel balancers, helping your shop cut comebacks and balance every wheel assembly with confidence.

Lug-Centric Balancing

Filters

MT-RSR 4/8 Lug SpeedPlate (Tips Sold Separately)
$382.98 - $382.98
$382.98
$382.98 - $382.98
$382.98

MT-RSR 4/8 Lug SpeedPlate (Tips Sold Separately)

SKU: 20-4LUG-40

MT-RSR

MT-RSR 4/8 Lug SpeedPlate (Tips Sold Separately) 4/8-Lug SpeedPlate Standard Shaft   Fits 4/8-lug passenger car, SUV, and light truck wheels with b...

View full details
$382.98 - $382.98
$382.98
$382.98 - $382.98
$382.98
Pin Plate # 4 for Wheel Balancer
$357.01 - $357.01
$357.01
$357.01 - $357.01
$357.01

Pin Plate # 4 for Wheel Balancer

SKU: 4024-40

MT-RSR

Pin Plate #4 Interchangeable Part Numbers: Similar to Snap-on # EEWB3-140A MT-RSR Insights: Most people would agree that the key to balancing any t...

View full details
$357.01 - $357.01
$357.01
$357.01 - $357.01
$357.01
Pin Plate # 3 for Wheel Balancer
Pin Plate # 3 for Wheel Balancer
$336.80 - $336.80
$336.80
$336.80 - $336.80
$336.80

Pin Plate # 3 for Wheel Balancer

SKU: 4023-40

MT-RSR

Pin Plate #3 Interchangeable Part Numbers: Similar to Snap-on # EEWB3-13A MT-RSR Insights: Most people would agree that the key to balancing any ti...

View full details
$336.80 - $336.80
$336.80
$336.80 - $336.80
$336.80
Pin Plate #2 for Wheel Balancer
Pin Plate #2 for Wheel Balancer
$336.80 - $336.80
$336.80
$336.80 - $336.80
$336.80

Pin Plate #2 for Wheel Balancer

SKU: 4022-40

MT-RSR

Pin Plate #2 Interchangeable Part Numbers: Similar to Snap-on # EEWB3-120A MT-RSR Insights: Most people would agree that the key to balancing any ...

View full details
$336.80 - $336.80
$336.80
$336.80 - $336.80
$336.80
Pin Plate #1 for Wheel Balancer
Pin Plate #1 for Wheel Balancer
$336.80 - $336.80
$336.80
$336.80 - $336.80
$336.80

Pin Plate #1 for Wheel Balancer

SKU: 4021-40

MT-RSR

Pin Plate #1 Interchangeable Part Numbers: Similar to Snap-on # EEWB3-11A MT-RSR Insights: Most people would agree that the key to balancing any ti...

View full details
$336.80 - $336.80
$336.80
$336.80 - $336.80
$336.80
$228.72 - $228.72
$228.72
$228.72 - $228.72
$228.72

Storage Board for Speedplates

SKU: 20-STBD

MT-RSR

Storage Board for Pin Plates + Speedplates MT-RSR Insights: This storage board is designed specifically for pin plates, providing a convenient and ...

View full details
$228.72 - $228.72
$228.72
$228.72 - $228.72
$228.72
AutoClamp Handle for 40mm Shafts - Threaded Grip Style
AutoClamp Handle for 40mm Shafts - Threaded Grip Style
$78.87 - $78.87
$78.87
$78.87 - $78.87
$78.87

AutoClamp Handle for 40mm Shafts - Threaded Grip Style

SKU: 20-AUTO-40

MT-RSR

 AutoClamp Handle for 40mm Shafts - Threaded Grip Style Fits the following wheel balancer brands: Beissbarth, Corghi, Hofmann, HPA Faip, John Bean,...

View full details
$78.87 - $78.87
$78.87
$78.87 - $78.87
$78.87
$76.04 - $76.04
$76.04
$76.04 - $76.04
$76.04

40mm-36mm Reducer Sleeve

SKU: 20-SLV-36

MT-RSR

40mm-36mm Reducer Sleeve for SpeedPlate Systems Allows 'Standard' 40mm SpeedPlates to be used on Wheel Balancers with a 36mm Shaft. Recommended to ...

View full details
$76.04 - $76.04
$76.04
$76.04 - $76.04
$76.04
$76.04 - $76.04
$76.04
$76.04 - $76.04
$76.04

40mm-28mm Reducer Sleeve

SKU: 20-SLV-28

MT-RSR

40mm-28mm Reducer Sleeve for SpeedPlate Systems Allows 'Standard' 40mm SpeedPlates to be used on Wheel Balancers with a 28mm Shaft. Recommended to ...

View full details
$76.04 - $76.04
$76.04
$76.04 - $76.04
$76.04
AutoClamp Handle for 40mm Shafts - Ball Style
$72.25 - $72.25
$72.25
$72.25 - $72.25
$72.25

AutoClamp Handle for 40mm Shafts - Ball Style

SKU: 20-AUTOA-40

MT-RSR

AutoClamp Handle for 40mm Shafts - Ball Style  AutoClamp Handle for 40mm Shafts - Threaded Grip Style Fits the following wheel balancer brands: But...

View full details
$72.25 - $72.25
$72.25
$72.25 - $72.25
$72.25
Planetary Gear Assembly For SpeedPlate
Planetary Gear Assembly For SpeedPlate
$37.70 - $37.70
$37.70
$37.70 - $37.70
$37.70

Planetary Gear Assembly For SpeedPlate

SKU: 20-GEAR-40

MT-RSR

Planetary Gear Assembly For SpeedPlate  Fits the following wheel balancer brands: Any of our SpeedPlates will use this planetary gear assembly MT-R...

View full details
$37.70 - $37.70
$37.70
$37.70 - $37.70
$37.70
SpeedPlate Maintenance Kit (15 each of Lg O-Ring, Sm O-Ring, Wave Spring)
SpeedPlate Maintenance Kit (15 each of Lg O-Ring, Sm O-Ring, Wave Spring)
$33.45 - $33.45
$33.45
$33.45 - $33.45
$33.45

SpeedPlate Maintenance Kit (15 each of Lg O-Ring, Sm O-Ring, Wave Spring)

SKU: 20-MK

MT-RSR

SpeedPlate Maintenance Kit (15 each of Large O-Ring, Small O-Ring, Wave Spring) Kit Includes: 15x Large O-Ring 15x Small O-Ring 15x Wave Spring/Was...

View full details
$33.45 - $33.45
$33.45
$33.45 - $33.45
$33.45
Small Taper Stud (B) for pin plate 3.7" Long for Wheel Balancer
$29.60 - $29.60
$29.60
$29.60 - $29.60
$29.60

Small Taper Stud (B) for pin plate 3.7" Long for Wheel Balancer

SKU: 4026

MT-RSR

Small Taper Stud (B) for pin plate 3.7" Long Each Range: .42 - .75 Fits the following wheel balancer brands: Snap-on Interchangeable Part Numbers: ...

View full details
$29.60 - $29.60
$29.60
$29.60 - $29.60
$29.60
Round top Stud (C) for pin plate 4.1" Long for Wheel Balancer
$28.23 - $28.23
$28.23
$28.23 - $28.23
$28.23

Round top Stud (C) for pin plate 4.1" Long for Wheel Balancer

SKU: 4027

MT-RSR

Round top Stud (C) for pin plate 4.1" Long Each Interchangeable Part Numbers: Similar to Snap-On # EEWB3-03A MT-RSR Insights: Part Of MT-RSR Set # ...

View full details
$28.23 - $28.23
$28.23
$28.23 - $28.23
$28.23
Wide taper Stud (A) for pin plate 3.2 Long" for Wheel Balancer
$26.97 - $26.97
$26.97
$26.97 - $26.97
$26.97

Wide taper Stud (A) for pin plate 3.2 Long" for Wheel Balancer

SKU: 4025

MT-RSR

Wide taper Stud (A) for pin plate 3.2 Long" Each Range: .59 - 1.01 Fits the following wheel balancer brands: Snap-on Interchangeable Part Numbers: ...

View full details
$26.97 - $26.97
$26.97
$26.97 - $26.97
$26.97
$19.09 - $19.09
$19.09
$19.09 - $19.09
$19.09

Torque Tip for SpeedPlate – Style C Long (Each)

SKU: 20-TIP-CL

MT-RSR

Torque Tip for SpeedPlate – Style C Long Sold per Each Ball SeatWidth 22.5mmLength 65mmTotal Length 120mm MT-RSR Insights: These tips fit onto any ...

View full details
$19.09 - $19.09
$19.09
$19.09 - $19.09
$19.09
Torque Tip for SpeedPlate – Style C
Torque Tip for SpeedPlate – Style C
$14.75 - $14.75
$14.75
$14.75 - $14.75
$14.75

Torque Tip for SpeedPlate – Style C (Each)

SKU: 20-TIP-C

MT-RSR

Torque Tip for SpeedPlate – Style C  Sold per Each Ball SeatWidth 22.5mmLength 40mmTotal Length 95mm MT-RSR Insights: These tips fit onto any of ou...

View full details
$14.75 - $14.75
$14.75
$14.75 - $14.75
$14.75
Torque Tip for SpeedPlate – Style E
Torque Tip for SpeedPlate – Style E
$13.41 - $13.41
$13.41
$13.41 - $13.41
$13.41

Torque Tip for SpeedPlate – Style E (Each)

SKU: 20-TIP-E

MT-RSR

Torque Tip for SpeedPlate – Style E Sold per Each Standard Taper Width 19mmLength 40mmTotal Length 95mm MT-RSR Insights: These tips fit onto any of...

View full details
$13.41 - $13.41
$13.41
$13.41 - $13.41
$13.41
Torque Tip for SpeedPlate – Style B
Torque Tip for SpeedPlate – Style B
$12.67 - $12.67
$12.67
$12.67 - $12.67
$12.67

Torque Tip for SpeedPlate – Style B (Each)

SKU: 20-TIP-B

MT-RSR

Torque Tip for SpeedPlate – Style B  Sold per Each Wide TaperWidth 28mmLength 25mmTotal Length 80mm MT-RSR Insights: These tips fit onto any of our...

View full details
$12.67 - $12.67
$12.67
$12.67 - $12.67
$12.67
Technician mounting a black alloy wheel on a wheel balancer using a flange plate adapter and centering cone

Get a full lug-centric setup in one purchase. These SpeedPlate, LCM, and MCT systems cover 4-lug through 8-lug passenger car, SUV, light truck, and medium duty truck wheels on a single 40mm shaft.

Shop Balancing Systems

How to Choose Lug-Centric Balancing Adapters

Black wheel balancer flange plate adapter with adjustable mounting pins and a center bore for lug-centric wheel balancing

When you buy a lug-centric system, start with your wheel balancer shaft diameter. Every SpeedPlate here is built for a 40mm shaft. Confirm your machine matches before you order. Match the plate to the bolt pattern and lug count you service most, then decide between a standard threaded shaft and an automatic clamping shaft. The clamping shaft mounts each wheel faster on a busy day, while the threaded version keeps the price down. Installation is straightforward. The plate indexes on the lug holes and torques down like a real wheel, so the tire sits the same way it does on the vehicle. That contact point is what gives you accurate balancing and fewer comebacks on truck wheels and larger assemblies. For service, keep spare torque tips and a replacement collet on the shelf, since tips take the wear. When a tip rounds off, swap it instead of replacing the plate.

Explore the Learning Hub, Shop Talk Blog, or Video Tutorials for balancing techniques, comparisons, and installation guidance.

Learn More

Frequently Asked Questions

Exploded view of a truck wheel balancing adapter kit with a red steel truck wheel, flange plate, wing nut, pressure cup, and centering cone

A wheel balancer adapter, also called a lug-centric plate, mounts a wheel on your balancer using its lug holes instead of the center hole. This lug mount matches how the wheel bolts to the vehicle and improves accurate balancing.

The plates and shafts here are made for a 40mm shaft wheel balancer and need an 8-inch shaft length. Check your machine's shaft diameter before ordering.

These systems balance 4-lug, 5-lug, 6-lug, and 8-lug passenger car, SUV, light truck, and medium duty truck wheels with bolt patterns roughly between 95mm and 180mm. They cover most lug-centric wheels a tire shop sees.

Yes. Orders over $149 ship with free shipping inside the United States. Most in-stock parts leave the warehouse within a few business days.

A standard shaft threads on by hand, while an automatic shaft clamps the wheel in place for faster mounting. Both are a 40mm shaft diameter and work as a wheel balancer adapter for the same plates.

Yes. Individual speed plates, torque tips, and a replacement collet are available for restocking a single part rather than a full kit or adapter kit.

Because the plate locates on the lug holes and not the hub bore, the wheel assembly spins the way it does on the road. That gives you a truer wheel balance than a loose cone on the wheel hub.

MT-RSR carries wheel balancer machines separately from these adapters. If you need a new balancer and a lug-centric kit together, our team can help you match the right shaft and plates.

Stay in the Loop!

Subscribe to our newsletter for the latest product updates and exclusive offers from MT-RSR.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare