Skip to content
F.A.Q. Shipping Catalogs All Products

Brake Lathe Consumable Parts & Supplies

MT-RSR carries a full selection of brake lathe consumable parts built for professional shops. Consumables are what hold your accuracy, finish quality, and repeatable resurfacing results in place cut after cut. From carbide inserts and tool holders to silencers and drive belts, our brake lathe parts keep an Amaco brake lathe running true. Pair consumables with brake clamping tools, repair parts, and kits and sets to keep your brake service fully equipped.

Brake Lathe Consumable Parts & Supplies

Filters

Ammco Short Negative Drum Tool Holder (Negative Rake)
$51.65 - $51.65
$51.65
$51.65 - $51.65
$51.65

Ammco Short Negative Drum Tool Holder (Negative Rake)

SKU: 7872S

MT-RSR

Short Negative Drum Tool Holder for Ammco (Negative Rake) MT-RSR Insights: Use with Insert 7681

$51.65 - $51.65
$51.65
$51.65 - $51.65
$51.65
24176 VN RH Drum Bits (Packs of 10)
$182.05 - $182.05
$182.05
$182.05 - $182.05
$182.05

24176 VN RH Drum Bits (Packs of 10)

SKU: 24176

MT-RSR

RH Drum Bits for VN (Packs of 10) Fits the following brake lathe brands: FMC/John Bean - 800 Drum Lathe Rels - 204, 205, 300, 302, Van Norman - 20...

View full details
$182.05 - $182.05
$182.05
$182.05 - $182.05
$182.05
Poly V Belt
$75.35 - $75.35
$75.35
$75.35 - $75.35
$75.35

Fiber Reinforced Multi-Rib V-Belt, Poly - For Brake Lathes

SKU: J-240B

MT-RSR

Poly V Belt

$75.35 - $75.35
$75.35
$75.35 - $75.35
$75.35
Micro Rib Poly V Belt
$46.65 - $46.65
$46.65
$46.65 - $46.65
$46.65

10-Rib Poly V-Belt, 30" Long, for Brake Lathes

SKU: 126381

MT-RSR

Micro Rib Poly V-Belt Pitch Length (Inches): 30"Bands/Ribs: 10

$46.65 - $46.65
$46.65
$46.65 - $46.65
$46.65
Torque Wrench for Mini Screw
Torque Wrench for Mini Screw
$17.03 - $17.03
$17.03
$17.03 - $17.03
$17.03

T7 Flag Handle Screwdriver/Mini Wrench for some Brake Lathe Bits

SKU: 14-T7

MT-RSR

Torx Wrench for Mini Screw MT-RSR Insights: •Among other uses, this tool is perfect for our 80337, 80337L, and 80337R tool holders for Hunter

$17.03 - $17.03
$17.03
$17.03 - $17.03
$17.03
$86.52 - $86.52
$86.52
$86.52 - $86.52
$86.52

Kwikway and Snap On Positive Rake Bits (10/pack, Special Screws)

SKU: 7109S

MT-RSR

Positive Rake Bits Kwikway/ Snap On (10/pack) Fits the following brake lathe brands: Pos Rake Bit for Kwikway models# BDL, CDL, NDL fits Hunter 221...

View full details
$86.52 - $86.52
$86.52
$86.52 - $86.52
$86.52
Accu Turn and FMC Zero Angle Drum Tool Holder (Short Version)
$54.26 - $54.26
$54.26
$54.26 - $54.26
$54.26

Accu-Turn and FMC Zero Angle Drum Tool Holder (Short Version)

SKU: 8286S

MT-RSR

Zero Angle Drum Tool Holder for Accu-Turn and FMC (Short Version) MT-RSR Insights: Use with Insert 7796 OR 7796P

$54.26 - $54.26
$54.26
$54.26 - $54.26
$54.26
Kwikway LH Positive Tool Holder
$34.00 - $34.00
$34.00
$34.00 - $34.00
$34.00

Kwikway LH Positive Tool Holder

SKU: 7091

MT-RSR

LH Positive Tool Holder Kwikway

$34.00 - $34.00
$34.00
$34.00 - $34.00
$34.00
Universal Ventilated Rotor Silencer Non Adjustable
$71.42 - $71.42
$71.42
$71.42 - $71.42
$71.42

Universal Ventilated Rotor Silencer - Non Adjustable

SKU: 6031

MT-RSR

Universal Ventilated Rotor Silencer - Non Adjustable Relaxed diameter of 9" Thickness of .55" Interchangeable Part Numbers: 434470, TMRBS35, BS35, 936

$71.42 - $71.42
$71.42
$71.42 - $71.42
$71.42
$117.97 - $117.97
$117.97
$117.97 - $117.97
$117.97

Pro-Cut Style Brake Lathe Bits - Pack of 6 with Screws

SKU: 50778A

MT-RSR

50778A - Pro-Cut Style Brake Lathe Bits - Pack of 6 with Screws Keep your brake lathe performing at its best with the 50778A Pro-Cut Style Brake ...

View full details
$117.97 - $117.97
$117.97
$117.97 - $117.97
$117.97
$60.05 - $60.05
$60.05
$60.05 - $60.05
$60.05

Hunter Brake Lathe Round Tool Holder - Left Hand

SKU: 80337L

MT-RSR

Round Tool Holder for Hunter - Left Side MT-RSR Insights: Used With: 2216263 Round insert. These round-bit tool holders allow for a wider, more uni...

View full details
$60.05 - $60.05
$60.05
$60.05 - $60.05
$60.05
$83.40 - $83.40
$83.40
$83.40 - $83.40
$83.40

Tool Holder for Accu-Turn and FMC (Right Hand)

SKU: 9043R

MT-RSR

Tool Holder for Accu-Turn and FMC (Right Side) MT-RSR Insights: These round bit tool holders allow for a wider, more uniform finish on routers. Goe...

View full details
$83.40 - $83.40
$83.40
$83.40 - $83.40
$83.40
$83.40 - $83.40
$83.40
$83.40 - $83.40
$83.40

Tool Holder for Accu-Turn and FMC (Left Hand)

SKU: 9043L

MT-RSR

Tool Holder for Accu-Turn and FMC (Left Side) MT-RSR Insights: These round bit tool holders allow for a wider, more uniform finish on routers. Goes...

View full details
$83.40 - $83.40
$83.40
$83.40 - $83.40
$83.40
$65.45 - $65.45
$65.45
$65.45 - $65.45
$65.45

Round Bit Tool Holder for Ammco (Right Hand)

SKU: BH69R

MT-RSR

Round Bit Tool Holder for Ammco - Right Side MT-RSR Insights: These round bit tool holders allow for a wider, more uniform finish on rotors. Goes w...

View full details
$65.45 - $65.45
$65.45
$65.45 - $65.45
$65.45
$47.51 - $47.51
$47.51
$47.51 - $47.51
$47.51

Left Short Positive Tool Holder

SKU: 8764LS

MT-RSR

Positive Tool Holder Interchangeable Part Numbers: Long version: 8763L OEM #: Accu 433763, FMC 405 For rotors, drums, flywheels, and heavy-duty dru...

View full details
$47.51 - $47.51
$47.51
$47.51 - $47.51
$47.51
Right Short Positive Tool Holder
Right Short Positive Tool Holder
$47.51 - $47.51
$47.51
$47.51 - $47.51
$47.51

Right Short Positive Tool Holder

SKU: 8763RS

MT-RSR

Positive Tool Holder Interchangeable Part Numbers: Long version: 8763L OEM #: Accu 433763, FMC 405 For rotors, drums, flywheels, and heavy-duty dru...

View full details
$47.51 - $47.51
$47.51
$47.51 - $47.51
$47.51
24209 VN Positive Rake Left Hand Drum Bit (Packs of 10)
24209 VN Positive Rake Left Hand Drum Bit (Packs of 10)
$104.26 - $104.26
$104.26
$104.26 - $104.26
$104.26

24209 VN Positive Rake Left Hand Drum Bit (Packs of 10)

SKU: 24209

MT-RSR

LH Drum Bits for VN (Packs of 10) Fits the following brake lathe brands: Rels: 24209 Van Norman: 302167 Interchangeable Part Numbers: Rels - 204, 2...

View full details
$104.26 - $104.26
$104.26
$104.26 - $104.26
$104.26
Short Positive Rake Tool Holder
$47.51 - $47.51
$47.51
$47.51 - $47.51
$47.51

Short Positive Rake Tool Holder

SKU: 7970

MT-RSR

Short Positive Rake Tool Holder (For Drums) MT-RSR Insights: Use with Insert 7914

$47.51 - $47.51
$47.51
$47.51 - $47.51
$47.51
$60.05 - $60.05
$60.05
$60.05 - $60.05
$60.05

Hunter Brake Lathe Round Tool Holder - Right Hand

SKU: 80337R

MT-RSR

Round Tool Holder for Hunter - Right Side MT-RSR Insights: Used With: 2216263 Round insert. These round-bit tool holders allow for a wider, more un...

View full details
$60.05 - $60.05
$60.05
$60.05 - $60.05
$60.05
$65.45 - $65.45
$65.45
$65.45 - $65.45
$65.45

Round Bit Tool Holder for Ammco (Left Hand)

SKU: BH69L

MT-RSR

Round Bit Tool Holder for Ammco - Left Side MT-RSR Insights: These round bit tool holders allow for a wider, more uniform finish on rotors. Goes wi...

View full details
$65.45 - $65.45
$65.45
$65.45 - $65.45
$65.45
$19.44 - $19.44
$19.44
$19.44 - $19.44
$19.44

Torx Wrench for Mini Screw - T8 Drive size

SKU: 14-T8

MT-RSR

14-T8 - Torx Wrench for Mini Screw - T8 Drive Size  The 14-T8 Torx Wrench is designed for installing and removing mini screws that require a T8 T...

View full details
$19.44 - $19.44
$19.44
$19.44 - $19.44
$19.44
Hold Down Clip for Round Inserts
$26.73 - $26.73
$26.73
$26.73 - $26.73
$26.73

Hold Down Clip for Round Inserts

SKU: BH69B

MT-RSR

Hold Down Clip for Round Inserts CB69 MT-RSR Insights: Used with Tool Holders BH69 and 9043 Made in the U.S.A.

$26.73 - $26.73
$26.73
$26.73 - $26.73
$26.73

Inserts and bits do the actual cutting on a brake rotor or drum, so a fresh edge is what separates a smooth finish from chatter. We stock negative- and positive-rake styles for Ammco lathes, John Bean, Accu-Turn, and other major brands.

Shop Lathe Bits & Inserts
A Shop Guide to Ammco Brake Lathe Parts and Consumables

A Shop Guide to Ammco Brake Lathe Parts and Consumables

Ordering goes faster when you shop by part numbers instead of by memory. Every listing shows interchangeable part numbers, so a shop running an Ammco model 4000 can confirm fitment before checkout rather than hoping. A bit that almost fits will chatter its way through the cut, and cost you the rotor. Installation takes minutes. Inserts index into the holder and torque down, a belt slips over the pulley set once tension is released, and boots slide on after the cross feed is backed out. Keeping the machine in its original configuration protects the design Ammco engineered into the lathe, which is exactly what gives you repeatable results job after job. Service intervals follow your volume. Busy brake bays rotate inserts weekly, swap silencer bands once the rubber hardens, and check boots and belts each quarter. A larger rotor or a heavy-duty truck drum pulls harder on the cutting edge, so plan on shorter insert life and order accordingly. Replace parts before lathe performance slips. Scored finishes, chatter, and a spindle that sounds different under load all point to worn components. MT-RSR ships within one to three business days, so a shelf spare is never far away.

Learn More

Frequently Asked Questions

Consumables are the wear items you replace on a schedule: inserts, bits, silencer bands, boots, and belts. Every tool in this category has a service life tied to how much you cut.

Match the holder first. A round bit holder takes a round carbide insert, while negative rake holders on machines with a 6950 twin cutter take negative rake inserts. Check the listed part numbers to confirm.

Yes. Alongside Ammco lathes, we stock bits and inserts for John Bean, FMC Ranger, Accu-Turn, Kwikway, and Snap-on machines, so most major brands in your bay are covered.

Size it to the brake rotor you are turning. Small solid bands suit thin rotors, ventilated bands wrap any vented rotor, and a larger rotor or automotive drum takes the longer band.

It shields the spindle and feed screw from metal chips and shop grime. A torn boot lets debris reach the threads, which is where feed accuracy starts to go.

Check the belt whenever you service the machine. Glazing, cracking, or slipping under load means it is time, and belts are also sold as part of the aluminum pulley set.

Our repair parts are built to OE brake lathe specifications with USA-made manufacturing behind them, so you get the highest-quality fit without paying dealer pricing.

Most rotors mount through the center hole with cones and spacers. Rotors that need lug location use the hub holes and a matching adapter set from our brake clamping category.

Yes, and plenty of shops do. We supply wear parts for older-style machines as well as new lathe machines, so a well-maintained lathe keeps earning for years.

Stay in the Loop!

Subscribe to our newsletter for the latest product updates and exclusive offers from MT-RSR.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare