Brake Lathe Cones & Adapters
MT-RSR offers a wide range of brake lathe centering cones and lathe adapters built for precise rotor mounting. These components hold passenger cars and light truck hubs stable during resurfacing, helping technicians cut a clean rotor or drum every time while extending the life of their equipment.
SKU: 3025-1
MT-RSRTruck set for F250/750 includes 2 73/4" Bell Clamps and 2 Cones Range: 4 1/2" to 6 1/2" Includes: Bore size 1" Kit # 3025-1 Range Indivi...
View full detailsSKU: 2059-28
MT-RSRWheel Balancer Cone - Range 5.03"-6.88" - 28mm Bore Hole Fits the following wheel balancer brands: 28mm Shaft Models: Accuturn: 5100, 5223, 5500,...
View full detailsSKU: 10074
MT-RSRSpacer, 2" Length and 1" bore for Brake Lathe Interchangeable Part Numbers: Ammco, Accuturn # 929574, AS29574, TMRAS29574 MT-RSR Insights: Availabl...
View full detailsSKU: 10088
MT-RSRCentering Cone For Brake Lathe Range: 4.30" X 4.68" - 1" Bore Interchangeable Part Numbers: 928588, 29588, AS29588, TMRAS29588 Ammco, Accuturn Mad...
View full detailsSKU: 10083
MT-RSRCentering Cone For Brake Lathe Range: 2.93" X 3.30" - 1" Bore Interchangeable Part Numbers: 929583, 29583, AS29583, TMRAS29583 Ammco, Accuturn Mad...
View full detailsSKU: 2059-40
MT-RSRWheel Balancer Cone - Range 5.03"-6.88" - 40mm Bore Hole Fits the following wheel balancer brands: 40mm Shaft Models: Accuturn: 1200, 1220, 1250,...
View full detailsSKU: 5062
MT-RSRTruck Set For Brake Lathe 1" Bore - Range: 3 7/8" - 5.1/8" (4 pcs) Includes: 5053 Cone 1" Bore - Range: 3 7/8" - 5 1/8" 5055 6 1/2" Dia...
View full detailsSKU: 7489
MT-RSRSmall Bell Clamp 3.62" - 1" Bore Interchangeable Part Numbers: 9489, AS9489, TMRAS9489 MT-RSR Insights: Available in 7347 and̴ 7347A kits, which re...
View full detailsSKU: 10010
MT-RSRUpgrade your tire service equipment with our Complete Adaptor Set for Passenger Car and Light Truck Hubless Flat Rotors. This set consists of two e...
View full detailsSKU: 10089
MT-RSRCentering Cone For Brake Lathe Range: 4.58" x 4.95" - 1" Bore Interchangeable Part Numbers: 929589, 29589, AS29589, TMRAS29589 Ammco, Accuturn Mad...
View full detailsSKU: 10090
MT-RSRCentering Cone For Brake Lathe Range: 4.85" x 5.23" - 1" Bore Interchangeable Part Numbers: 929590, 29590, AS29590, TMRAS29590 Ammco, Accuturn Mad...
View full detailsSKU: 5066
MT-RSRTruck Set For Brake Lathe 1" Bore - Range: 3 1/2" - 6 1/2" (6 pcs) Includes: 5053 Cone 1" Bore - Range: 3 7/8" - 5 1/8" 5052 Cone 1" Bore - ...
View full detailsSKU: 10086
MT-RSRCentering Cone For Brake Lathe Range: 3.74 X 4.13" - 1" Bore Interchangeable Part Numbers: 929586, 29586, AS29586, TMRAS29586 Ammco, Accuturn Made...
View full detailsSKU: 10082
MT-RSRCentering Cone For Brake Lathe Range: 2.65" X 3.03" - 1" Bore Interchangeable Part Numbers: 29582, 929582, AS29582, TMRAS29582 Ammco, Accuturn Mad...
View full detailsSKU: 5061
MT-RSRTruck Set For Brake Lathe 1" Bore - Range: 4 1/2" - 5 1/2" (4 pcs) Includes: 5056-1 7 3/4" Diameter Bell Clamp - 1" Bore (2X) 5052 Cone ...
View full detailsSKU: 5035
MT-RSRDouble ended For Brake Lathe Adapter 1" Bore- Range: 2.441" - 2.89" Interchangeable Part Numbers: 9194, AS9194, TMRAS9194, 50-4014 Made in the U.S.A.
SKU: 10085
MT-RSRCentering Cone For Brake Lathe Range: 3.48" X 3.85" - 1" Bore Interchangeable Part Numbers: 928585, 29585, AS29585, TMRAS29585 Ammco, Accuturn Mad...
View full detailsSKU: 2059-36
MT-RSRWheel Balancer Cone - Range 5.03"-6.88" - 36mm Bore Hole Fits the following wheel balancer brands: 36mm Shaft Models: Accuturn: 6100, 6600, 6800C...
View full detailsSKU: 5034
MT-RSRDouble ended Adapter For Brake Lathe 1" Bore - Range: 2,074" - 2.440" Interchangeable Part Numbers: 9193, AS9193, TMRAS9193, 50-4013 Made in the U...
View full detailsSKU: 30105
MT-RSRCone For Brake Lathe 1" Bore - Range: 5.50" - 6.50" Interchangeable Part Numbers: 3010, AS3010, TMR3010 Made in the U.S.A.
SKU: 7902
MT-RSRCone 1" Bore - Range: 1.250" -1.750" Interchangeable Part Numbers: 3902, AS3902, TMRAS3902 Made in the U.S.A.
Sale
Sale
Complete Adapter Set for Heavy truck (Hubless flat Rotors) Ammco , Hunter, Accuturn, Bosch
SKU: 10013
MT-RSRUpgrade your heavy truck tire service capabilities with our Complete Adapter Set for Hubless Flat Rotors. Compatible with Ammco, Hunter, Accuturn, ...
View full detailsSKU: 10084
MT-RSRCentering Cone For Brake Lathe Range: 3.20" X 3.58" - 1" Bore Interchangeable Part Numbers: 929854, 29584, AS29584, TMRAS29584 Ammco, Accuturn Mad...
View full detailsSKU: 7906
MT-RSRPlug Dial for Twin Cutter Interchangeable Part Numbers: Ammco # 906906 6906, DA6906, TMRDA6906 Made in the U.S.A.
A complete adapter set gives your shop every centering cone, bell clamp, and spacer in one package, so the right fit is always on the tool board. The 20- and 22-piece ammco brake lathe sets cover the widest span of cars and trucks you will see.
Built for the larger center hole on medium and heavy hubs, each truck adapter set clamps big rotors and drums securely so you get a smooth cut pass without chatter. The 4- and 5-piece packages are sized for light truck and commercial work.
A step-down adapter takes a 1 7/8" arbor machine down to a standard 1" bore, so your existing cones and clamps fit lathes like Accuturn without buying all-new tooling. It is the quickest way to add compatibility to a second machine.
Bell clamps back up the rotor against the cone and spread clamping force evenly across the face, which keeps the part flat and the finish consistent. Diameters run from 4 1/2" up to 7 3/4" to match the hat on whatever comes into the bay.
Getting a clean finish starts with how the part sits on the lathe. When you are shopping, match the centering cone range to your hub opening and confirm the adapter is bored for a 1" bore arbor, which is the standard on ammco lathe, Accuturn, Bosch, and Hunter machines. A full adapter package keeps a cone and clamp ready for nearly any hub, so a tech is not hunting for the right piece mid-job and service time stays low. Installation is simple: slide the centering cone onto the arbor, seat the rotor or hubless drum, add the bell clamp and arbor head nut, and snug it down so the part runs true with no buildup of vibration. Inspect your cones and clamps for wear during routine service and replace any piece that no longer seats flat, since a worn automotive centering cone is the fastest route to chatter and a rejected cut pass. Many of these parts are machined at MT-RSR and ship in 1 to 3 business days to get your machine back in service. Outfit your bay with precision-machined cones and adapters that pay for themselves in cleaner rotors, fewer comebacks, and more brake jobs turned every day.
Explore the Learning Hub, Shop Talk Blog, or Video Tutorials for balancing techniques and installation guidance.
These parts fit any 1" arbor machine, including the ammco brake lathe, Accuturn, Bosch, and Hunter models. If your machine uses a larger arbor, a step-down adapter brings it down to the 1" bore your cones need.
Both. You can buy a single centering cone or automotive centering cone for a specific hub, or a full adapter set such as the 20-piece or 22-piece ammco lathe package that covers a wide range in one purchase.
Yes. The cone and clamp combination seats a hubless drum or hubless rotor securely against the lathe face, giving the stability you need for an even finish on passenger cars and trucks alike.
Reach for a truck adapter set or truck adapter package. These include the larger cones and clamps sized for the bigger center hole on light truck and commercial hubs, so you can mount heavy rotors and drums without a separate machine.
Chatter comes from rotor vibration during the cut, and a silencer is the most direct way to dampen it. Wrap a silencer band around the rotor or drum, or attach a clip-on silencer before you start resurfacing to cut down on vibration and noise for a cleaner finish. You can find bands and clip-on silencers sized for vented rotors, solid rotors, drums, and Pro-Cut lathes in our silencers collection.
Yes. To round out your clamping setup, MT-RSR stocks the arbor nut that locks the centering cone and rotor in place, plus a full arbor set matched to your lathe model. Browse the Arbor Nuts and Arbors collections.
Once the part is mounted, your cutting bit decides the finish. MT-RSR carries both negative rake and positive rake inserts for a clean cut on cast and harder rotors. Shop them in the Lathe Bits & Inserts collection.
Every centering cone, bell clamp, and lathe adapter in this collection is machined for a 1" bore, which is the standard arbor size on most shop brake lathes. That center hole lets the parts mount directly without an extra bushing.
Subscribe to our newsletter for the latest product updates and exclusive offers from MT-RSR.
Add $149.00 more to qualify for free shipping.
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}