Skip to content
F.A.Q. Shipping Catalogs All Products

Brake Lathes, Clamping Tools, Consumables & Repair Kits

MT-RSR offers a complete selection of brake lathes and brake lathe parts built for professional shops. Our inventory covers everything from brake clamping tools and consumable parts to repair parts and complete service kits, giving technicians the solutions needed for accurate and efficient brake resurfacing.

Brake Lathes, Clamping Tools, Consumables & Repair Kits

Filters

$
$
Step Adapter Takes 1 7/8 "Bore down to 1" Bore (Set of 3)
$144.69 - $144.69
$144.69
$144.69 - $144.69
$144.69

Step Adapter Takes 1 7/8 "Bore down to 1" Bore (Set of 3)

SKU: 7790

MT-RSR

Step Adaptor Takes 1 7/8 "Bore down to 1" Bore (Set of 3) Includes: 7791 (three) Step Adapter Takes 1 7/8" Bore down to 1" Bore Inter...

View full details
$144.69 - $144.69
$144.69
$144.69 - $144.69
$144.69
$984.12 - $984.12
$984.12
$984.12 - $984.12
$984.12

1 HP Drive Motor for Ammco Brake Lathes (Does Not fit 3850)

SKU: 7168

MT-RSR

1 H. P. Motor. Direct Fit Fits the following brake lathe brands: Motor Only For Ammco Lathes. (Does Not Fit 3850 Lathe) Fit: 3000, 4000, 4100, 7500...

View full details
$984.12 - $984.12
$984.12
$984.12 - $984.12
$984.12
Spindle Quill Gear
Spindle Quill Gear
$342.35 - $342.35
$342.35
$342.35 - $342.35
$342.35

Spindle Drive Quill Gear for Brake Lathes

SKU: 70830

MT-RSR

Replacement Spindle Quill Gear. 10 5/8s" long with a 2.83" Diameter Fits the following Brake Lathe Models:  Ammco 3000 / 4000 Interchangeable Part ...

View full details
$342.35 - $342.35
$342.35
$342.35 - $342.35
$342.35
Cone 1" Bore Range: 2.89 3.500"
$81.23 - $81.23
$81.23
$81.23 - $81.23
$81.23

Cone For Brake Lathe 1" Bore - Range: 2.89 - 3.500"

SKU: 7107

MT-RSR

Cone For Brake Lathe 1" Bore - Range: 2.89 - 3.500" Interchangeable Part Numbers: 3107, AS3107, TMRAS3107 Made in the U.S.A.

$81.23 - $81.23
$81.23
$81.23 - $81.23
$81.23
Cone 1" Bore Range: 5" 6 1/8"
$181.15 - $181.15
$181.15
$181.15 - $181.15
$181.15

Cone For Brake Lathe 1" Bore - Range: 5" - 6 1/8"

SKU: 5054

MT-RSR

Cone For Brake Lathe 1" Bore - Range: 5" -  6 1/8" Fits the following wheel balancer brands: Fits Any 1" bore brake lathe Ammco, Ranger, Accuturn,...

View full details
$181.15 - $181.15
$181.15
$181.15 - $181.15
$181.15
$71.09 - $71.09
$71.09
$71.09 - $71.09
$71.09

Inserts for VN/Rels Brake Lathe 7687 (10/pack)

SKU: 29687A

MT-RSR

Inserts for VN/ Rels (10/pack) Negative Rake Bit 1/32nd Radius Fits the following brake lathe brands: Rels - 204C, 204D, 204S, 205DS, 415 Van Norma...

View full details
$71.09 - $71.09
$71.09
$71.09 - $71.09
$71.09
Right hand thread VN, Accu Turn, FMC Arbor Nut
$32.74 - $32.74
$32.74
$32.74 - $32.74
$32.74

Arbor Nut, 1" - For Accu-Turn, VN, FMC Brake Lathes (Reverse RH Thread)

SKU: 20474R

MT-RSR

Arbor Nut for VN, Accu-Turn, FMC with Right hand thread MT-RSR Insights: Brake lathes typically come standard with an arbor and nut that has left h...

View full details
$32.74 - $32.74
$32.74
$32.74 - $32.74
$32.74
Gear For Ammco Trap assembly
Gear For Ammco Trap assembly
$91.56 - $91.56
$91.56
$91.56 - $91.56
$91.56

Drive Gear for Ammco 7757 Trap Assembly

SKU: 4774

MT-RSR

Gear For Ammco Trap assembly. Part of Assembly Number 7757

$91.56 - $91.56
$91.56
$91.56 - $91.56
$91.56
Truck Set for F250/750
$649.72 - $649.72
$649.72
$649.72 - $649.72
$649.72

1" Bore Truck Set for Brake Lathe for F250/750

SKU: 3025-1

MT-RSR

Truck set for F250/750 includes 2 73/4" Bell Clamps and 2 Cones Range: 4 1/2" to 6 1/2" Includes: Bore size 1" Kit # 3025-1 Range Indivi...

View full details
$649.72 - $649.72
$649.72
$649.72 - $649.72
$649.72
Centering Cone Range: 2.12" X 2.48" 1" Bore
$86.48 - $86.48
$86.48
$86.48 - $86.48
$86.48

Centering Cone For Brake Lathe Range: 2.12" X 2.48" - 1" Bore

SKU: 10080

MT-RSR

Centering Cone For Brake Lathe Range: 2.12" X 2.48" - 1" Bore Interchangeable Part Numbers: Ammco # 929580, AS29580, TMRAS29580, 29580 Made in the...

View full details
$86.48 - $86.48
$86.48
$86.48 - $86.48
$86.48
Dial Micrometer for Twin Cutter 6950 & 6900
$66.94 - $66.94
$66.94
$66.94 - $66.94
$66.94

Dial Micrometer for Twin Cutter 6950 & 6900

SKU: 7907

MT-RSR

Dial Micrometer for Twin Cutter 6950 & 6900 Interchangeable Part Numbers: Ammco # 906907

$66.94 - $66.94
$66.94
$66.94 - $66.94
$66.94
7687 VN/Rels Inserts (10/pack)
7687 VN/Rels Inserts (10/pack)
$71.09 - $71.09
$71.09
$71.09 - $71.09
$71.09

7687 VN/Rels Inserts (10/pack)

SKU: 7687

MT-RSR

Inserts for VN/ Rels (10/pack) Negative Rake Bit 1/32nd Radius Fits the following brake lathe brands: Rels - 204C, 204D, 204S, 205DS, 415 Van Norma...

View full details
$71.09 - $71.09
$71.09
$71.09 - $71.09
$71.09
Special Truck Set 1" Bore Range: 4 1/2" 5 1/2" (4 pcs)
$422.72 - $422.72
$422.72
$422.72 - $422.72
$422.72

Special Truck For Brake Lathe Set 1" Bore - Range: 4.5" - 5.5" (4 pcs)

SKU: 5063

MT-RSR

Special Truck For Brake Lathe Set 1" Bore - Range: 4.5" - 5.5" (4 pcs) Includes: 5052 Cone 1" Bore - Range: 4 1/2" - 5 1/2" 5055 6 1/2" ...

View full details
$422.72 - $422.72
$422.72
$422.72 - $422.72
$422.72
Rubber Connector for 7492
$14.35 - $14.35
$14.35
$14.35 - $14.35
$14.35

Rubber Connector for 7492 - Self-Aligning Spacer for Brake Lathes

SKU: 7492R

MT-RSR

Rubber Connector for 7492 Interchangeable Part Numbers: Replacement part for: 7492 Made in the USA

$14.35 - $14.35
$14.35
$14.35 - $14.35
$14.35
Centering Cone Range: 4.30" X 4.68" 1" Bore
$97.20 - $97.20
$97.20
$97.20 - $97.20
$97.20

Centering Cone For Brake Lathe Range: 4.30" X 4.68" - 1" Bore

SKU: 10088

MT-RSR

Centering Cone For Brake Lathe Range: 4.30" X 4.68" - 1" Bore Interchangeable Part Numbers: 928588, 29588, AS29588, TMRAS29588 Made in the U.S.A.

$97.20 - $97.20
$97.20
$97.20 - $97.20
$97.20
Spacer 2" Length and 1" Bore
$53.55 - $53.55
$53.55
$53.55 - $53.55
$53.55

Spacer, 2" Length and 1" bore for Brake Lathe

SKU: 10074

MT-RSR

Spacer, 2" Length and 1" bore for Brake Lathe Interchangeable Part Numbers: Ammco # 929574, AS29574, TMRAS29574 MT-RSR Insights: Available in Silve...

View full details
$53.55 - $53.55
$53.55
$53.55 - $53.55
$53.55
Accu Turn Way Cover Spacer
$30.08 - $30.08
$30.08
$30.08 - $30.08
$30.08

Way Cover Spacer for Accu-Turn Brake Lathes

SKU: 8682

MT-RSR

Way Cover Spacer for Accu-Turn

$30.08 - $30.08
$30.08
$30.08 - $30.08
$30.08
Twin Chuck Kit
$1,639.62 - $1,639.62
$1,639.62
$1,639.62 - $1,639.62
$1,639.62

Twin Chuck Kit for Brake Lathes (2 Chucks, 4 Backing Plates)

SKU: 8240

MT-RSR

Twin Chuck Kit (Part # 8240) For Machining Hub-less Drums and Rotors through 1 Ton Trucks The kit comes complete with two se...

View full details
$1,639.62 - $1,639.62
$1,639.62
$1,639.62 - $1,639.62
$1,639.62
Cone 1" Bore Range: 2.328 2.968"
$72.66 - $72.66
$72.66
$72.66 - $72.66
$72.66

Cone For Brake Lathe 1" Bore - Range: 2.328 -2.968"

SKU: 7108

MT-RSR

Cone For Brake Lathe 1" Bore - Range: 2.328 -2.968" 3108, AS3108, TMRAS3108 Made in the U.S.A.

$72.66 - $72.66
$72.66
$72.66 - $72.66
$72.66
Slide Rotor for 7075
$32.77 - $32.77
$32.77
$32.77 - $32.77
$32.77

Slide/Link Connection for Ammco 7075 Rotor Silencer

SKU: 7076

MT-RSR

Slide Rotor for 7075 Interchangeable Part Numbers: 10282, SL10282, TMRSL10282

$32.77 - $32.77
$32.77
$32.77 - $32.77
$32.77
Accu Turn and FMC R & L Hand Tool Holder
$152.38 - $152.38
$152.38
$152.38 - $152.38
$152.38

Accu-Turn and FMC R & L Hand Tool Holder

SKU: 9043

MT-RSR

R & L Hand Tool Holder for Accu-Turn and FMC Includes: 9043L Left Hand Round Tool Holder 9043R Right Hand Round Tool Holder MT-R...

View full details
$152.38 - $152.38
$152.38
$152.38 - $152.38
$152.38
V Belt for Ammco 4100
$18.83 - $18.83
$18.83
$18.83 - $18.83
$18.83

V-Belt for Ammco 4100 Series Brake Lathes

SKU: 7411

MT-RSR

V-Belt for Ammco 4100

$18.83 - $18.83
$18.83
$18.83 - $18.83
$18.83
Cone 1" Bore Range 1.187" 2.250"
$62.12 - $62.12
$62.12
$62.12 - $62.12
$62.12

Cone For Brake Lathe 1" Bore - Range 1.187" - 2.250" Same as 7903

SKU: 3003

MT-RSR

Cone For Brake Lathe 1" Bore - Range 1.187" - 2.250" Same as 7903

$62.12 - $62.12
$62.12
$62.12 - $62.12
$62.12
Brass Thrust Washer for Quill Drive Gear
$60.71 - $60.71
$60.71
$60.71 - $60.71
$60.71

Brass Thrust Washer for Quill Drive Gear

SKU: 7033

MT-RSR

Brass Thrust Washer for Quill Drive Gear Interchangeable Part Numbers: Ammco # 903033, 40030

$60.71 - $60.71
$60.71
$60.71 - $60.71
$60.71

Center the rotor or drum on the arbor with cones & adapter set options, quick chucks, and spacers that hold the work true for a clean, accurate cut.

Shop Brake Clamping Parts
A Quick Guide to Buying Brake Lathe Parts

A Quick Guide to Buying Brake Lathe Parts

Finding the right part should be the easy part of your day. Match each item to your exact lathe model, then use the interchangeable part numbers MT-RSR lists on every product to cross-reference an Ammco model or any other machine and lock in fitment before you check out. Seeing chatter on a finished face or watching a bit lose its edge? A fresh insert and a quick look at your tool holders has you turning clean rotors again in minutes. Stock up on consumables like silencer bands and belts today, and a worn part never costs you a job.


For setup walkthroughs and replacement tips, visit our Learning Hub or Video Tutorials.

Learn More

Frequently Asked Questions

We stock brake clamping tools, consumable parts, repair parts, and complete kits for both bench and on-car lathes. That covers everything you need to clamp, cut, and finish a brake rotor or drum.

Our catalog fits major brands, including Ammco, Accu-Turn, Hunter, John Bean, FMC, and Ranger. Most items list interchangeable part numbers so you can confirm a match against your O.E. reference before you buy.

The shear gear is a sacrificial part in the Ammco right-angle drive that breaks to protect the gear train if the lathe binds. If your Ammco brake lathe stops feeding, inspect the shear gear first and swap it before you check the heavier drive parts.

Positive rake bits slice with less cutting pressure and suit softer rotors, while negative rake bits run stronger on harder metal and resist chatter. We carry both styles along with the tool holders that index them.

Yes. A rotor silencer band wraps the face to dampen vibration during a cut, and a drum silencer band does the same inside a drum. Both cut down chatter and help leave a smoother finish.

A cross feed extension plate kit moves the tool farther across the table so you can machine larger rotors on Ammco lathes, specifically the 4000 and 4100. Confirm the kit against your machine before ordering.

The 6950 twin cutter is the dual-bit head on many Ammco brake lathes that turns both rotor faces at once. Several of our tool holders and the matching return spring fit any car lathe equipped with the 6950 twin cutter.

Protective spindle boots, feed screw boots, and drive belts are consumable parts that wear with everyday use. Keeping a spare aluminum pulley set with belt on hand also saves downtime when a drive slips.

Yes, MT-RSR offers durable replacement parts specifically designed to replace worn consumables and keep your brake lathe functioning effectively.

Stay in the Loop!

Subscribe to our newsletter for the latest product updates and exclusive offers from MT-RSR.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare