Brake Lathe Clamping Tools & Adapters
MT-RSR supplies brake lathe adapters and clamping tools for accurate rotor mounting. Secure clamping delivers consistent resurfacing, less vibration, and longer lathe life. Cones and lathe adapters handle precision mounting and alignment for hubless rotors, quick chucks speed up setup with quick drum-to-rotor changeover, and spacers hold the rotor in the right position without vibration. Pair them with Consumable Parts, Repair Parts, and Kits & Sets to keep your brake lathe fully operational.
SKU: 5041
MT-RSRSpacer For Brake Lathe 1" Bore X 1 1/2" Length Made of Steel Interchangeable Part Numbers: 41, SP41, TMRSP41 Made in the U.S.A.
SKU: 7106
MT-RSRCone For Brake Lathe 1" Bore - Range: 3.421 - 4.031" Interchangeable Part Numbers: 3106, AS3106, TMRAS3106, 50-4017 Made in the U.S.A.
SKU: 7108
MT-RSRCone For Brake Lathe 1" Bore - Range: 2.328 -2.968" 3108, AS3108, TMRAS3108 Made in the U.S.A.
SKU: 5054
MT-RSRCone For Brake Lathe 1" Bore - Range: 5" - 6 1/8" Fits the following wheel balancer brands: Fits Any 1" bore brake lathe Ammco, Ranger, Accuturn,...
View full detailsSKU: 3025-1
MT-RSRTruck set for F250/750 includes 2 73/4" Bell Clamps and 2 Cones Range: 4 1/2" to 6 1/2" Includes: Bore size 1" Kit # 3025-1 Range Indivi...
View full detailsSKU: 10080
MT-RSRCentering Cone For Brake Lathe Range: 2.12" X 2.48" - 1" Bore Interchangeable Part Numbers: Ammco, Accuturn # 929580, AS29580, TMRAS29580, 29580 ...
View full detailsSKU: 5063
MT-RSRSpecial Truck For Brake Lathe Set 1" Bore - Range: 4.5" - 5.5" (4 pcs) Includes: 5052 Cone 1" Bore - Range: 4 1/2" - 5 1/2" 5055 6 1/2" ...
View full detailsSKU: 2059-28
MT-RSRWheel Balancer Cone - Range 5.03"-6.88" - 28mm Bore Hole Fits the following wheel balancer brands: 28mm Shaft Models: Accuturn: 5100, 5223, 5500,...
View full detailsSKU: 10088
MT-RSRCentering Cone For Brake Lathe Range: 4.30" X 4.68" - 1" Bore Interchangeable Part Numbers: 928588, 29588, AS29588, TMRAS29588 Ammco, Accuturn Mad...
View full detailsSKU: 10083
MT-RSRCentering Cone For Brake Lathe Range: 2.93" X 3.30" - 1" Bore Interchangeable Part Numbers: 929583, 29583, AS29583, TMRAS29583 Ammco, Accuturn Mad...
View full detailsSKU: 10074
MT-RSRSpacer, 2" Length and 1" bore for Brake Lathe Interchangeable Part Numbers: Ammco, Accuturn # 929574, AS29574, TMRAS29574 MT-RSR Insights: Availabl...
View full detailsSKU: 8240
MT-RSRTwin Chuck Kit (Part # 8240) For Machining Hub-less Drums and Rotors through 1 Ton Trucks The kit comes complete with two se...
View full detailsSKU: 2059-40
MT-RSRWheel Balancer Cone - Range 5.03"-6.88" - 40mm Bore Hole Fits the following wheel balancer brands: 40mm Shaft Models: Accuturn: 1200, 1220, 1250,...
View full detailsSKU: 10090
MT-RSRCentering Cone For Brake Lathe Range: 4.85" x 5.23" - 1" Bore Interchangeable Part Numbers: 929590, 29590, AS29590, TMRAS29590 Ammco, Accuturn Mad...
View full detailsSKU: 10089
MT-RSRCentering Cone For Brake Lathe Range: 4.58" x 4.95" - 1" Bore Interchangeable Part Numbers: 929589, 29589, AS29589, TMRAS29589 Ammco, Accuturn Mad...
View full detailsSKU: 10010
MT-RSRUpgrade your tire service equipment with our Complete Adaptor Set for Passenger Car and Light Truck Hubless Flat Rotors. This set consists of two e...
View full detailsSKU: 7489
MT-RSRSmall Bell Clamp 3.62" - 1" Bore Interchangeable Part Numbers: 9489, AS9489, TMRAS9489 MT-RSR Insights: Available in 7347 and̴ 7347A kits, which re...
View full detailsSKU: 5062
MT-RSRTruck Set For Brake Lathe 1" Bore - Range: 3 7/8" - 5.1/8" (4 pcs) Includes: 5053 Cone 1" Bore - Range: 3 7/8" - 5 1/8" 5055 6 1/2" Dia...
View full detailsSKU: 10086
MT-RSRCentering Cone For Brake Lathe Range: 3.74 X 4.13" - 1" Bore Interchangeable Part Numbers: 929586, 29586, AS29586, TMRAS29586 Ammco, Accuturn Made...
View full detailsSKU: 10082
MT-RSRCentering Cone For Brake Lathe Range: 2.65" X 3.03" - 1" Bore Interchangeable Part Numbers: 29582, 929582, AS29582, TMRAS29582 Ammco, Accuturn Mad...
View full detailsSKU: 5066
MT-RSRTruck Set For Brake Lathe 1" Bore - Range: 3 1/2" - 6 1/2" (6 pcs) Includes: 5053 Cone 1" Bore - Range: 3 7/8" - 5 1/8" 5052 Cone 1" Bore - ...
View full detailsSKU: 80040K
MT-RSRDouble Chuck Adapter Set for 1" Arbor Includes: Double Chuck Adapter (5"diameter double sided chuck)Small Backing Plate (4-3/4" diameter)Medium Bac...
View full detailsSKU: 10085
MT-RSRCentering Cone For Brake Lathe Range: 3.48" X 3.85" - 1" Bore Interchangeable Part Numbers: 928585, 29585, AS29585, TMRAS29585 Ammco, Accuturn Mad...
View full detailsSKU: 5061
MT-RSRTruck Set For Brake Lathe 1" Bore - Range: 4 1/2" - 5 1/2" (4 pcs) Includes: 5056-1 7 3/4" Diameter Bell Clamp - 1" Bore (2X) 5052 Cone ...
View full details
Centering cones and lathe adapters sized to fit the center-hole ranges you work on every day, from small passenger car rotors to larger bores. We stock both Individual pieces and full sets.
A three-jaw quick chuck with backing plate clamps drums and rotors with center holes from 2-1/8" to 3-3/4". It cuts setup time when you are moving through a stack of jobs.
Steel spacer stock in 1/2", 1", 1-1/2", and 2" lengths for a 1" arbor, plus a self-aligning spacer that squares rotors that do not sit flat.
Start with your arbor size. Most Ammco brake lathe setups and compatible machines from Accuturn, Bosch, and Hunter run a 1" arbor. We list interchangeable part numbers on every product page so you can match what is already sitting on your bench instead of guessing. Size your cone adapter range to the center hole diameters you actually service. A standard adapter kit handles the passenger-car work that fills most bays, while light-truck and heavy-duty rotors need a truck set that reaches those larger bores. Cleanliness pays here more than anywhere. Grit trapped between a centering cone and the rotor hub comes back as runout in the cut, so wipe the arbor and adapter faces first. Seat the adapter squarely, add a spacer where you need standoff, and snug the arbor nut until the assembly holds without rocking. A self-aligning spacer squares up hubless rotors that refuse to sit flat. Give your cones and adapters a look for nicks, burrs, and taper wear. Order replacements individually or as a full adapter set, and keep spare silencer bands and repair parts on the shelf so one worn piece never puts your lathe out of service.
Brake lathe adapters are the cones, bell clamps, and mounting hardware that hold a rotor or drum on the arbor while you cut. Correct clamping keeps the part concentric so the brake surface comes out true.
A centering cone on each side of the rotor centers it on the arbor. Match the cone range to the center hole diameter, then add a bell clamp to hold it square.
Most of our clamping hardware fits any 1" arbor lathe, which covers common Ammco lathe models along with Accuturn, Bosch, Hunter, and Rels machines. Every listing shows interchangeable part numbers for cross-reference.
The three-jaw quick chuck grips rotors and drums by the center hole and ships with a 5" backing plate and key. It gives you a quick drum-to-rotor changeover without swapping cones between jobs.
Use a spacer to position the rotor away from the arbor head so the cutting tool clears the assembly. A self-aligning spacer adds correction for parts that sit at a slight angle.
A double taper adapter has a cone on each end, so one piece covers two bore ranges. Our five-piece set spans 1.32" to 2.89" on a 1" bore.
Yes. The five-piece truck set covers a 3-7/8" to 6-1/8" range on a 1" bore, which handles most light truck and heavy-duty work.
You can. We sell individual cones, clamps, and spacers alongside 20-piece and 22-piece adapter set options. If you only need the adapter missing from your kit, order it on its own.
Verify the clamp is tight and the faces are clean, then slow the cross feed and drop to a lower speed for the final pass. Silencer bands damp vibration on thin brake rotors.
An extra arbor nut, a spare set of silencer bands, and common repair parts cover most downtime. Our shop also stocks wheel balancers and balancer accessories if you are outfitting a full bay.
Subscribe to our newsletter for the latest product updates and exclusive offers from MT-RSR.
Add $149.00 more to qualify for free shipping.
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}